Two Pack Half Inch Thread Plastic Electric Solenoid Valve With Water Inlet Flow Switch Magnetic Normally Closed DC 12V 0.02 To 0.8 MPa All Plastic Body Plug And Play Ideal For Home Garden Aquariums And Small Industrial Projects

Two-Pack 1/2-Inch Plastic Solenoid Valve for Water Systems
✔️ DC12V normally closed, 0.02-0.8 MPa, all-plastic body, 2 pcs

This compact, all-plastic 1/2-inch solenoid valve is designed to control water flow in low-pressure lines. It’s ideal for home irrigation, aquariums, small garden projects, and light industrial setups where plug-and-play reliability matters. The normally closed design means water flows when energized and stops when power is removed.

✅ Flow ranges at different pressures: 0.02 MPa > 1.5 L/min; 0.10 MPa > 7 L/min; 0.30 MPa > 12 L/min; 0.80 MPa > 20 L/min
✅ Rated power 5W; DC12V coil; polarity-insensitive operation
✅ All-plastic body with external thread 20 mm and screw hole pitch 25 mm; size 84x57 mm; coil 34x23 mm (3.31x2.24 in; coil 1.34x0.91 in)
✅ Temperature range 0-100°C; suitable for water and low viscosity fluids
✅ Lifespan: ≥300,000 cycles in normal use; ≥500,000 cycles in lab testing
✅ Pack: 2 pieces in the set

💡 What is a common use case for a 1/2 inch plastic solenoid valve in hobby and light industrial projects? It’s handy for turning water on and off in small lines. - Handy for irrigation and aquarium control
- Works with water and low viscosity fluids, 0-100°C
- DC12V coil with low power consumption (5W) and normally closed operation