Single Spherical Bushing SBB202RS Inch Series, High Carbon Steel, Steel on Steel, Double Sealed Non Separable, Chromium Plated Finish, 1-1/4 in (31.75 mm) Bore, 2.000 in (50.8 mm) Housing, Static 630000 N, Dynamic 105000 N, -30 to 80 C
✔️ 1-1/4 in (31.75 mm) bore, 2.000 in (50.8 mm) housing, double sealed
Sold as a single bearing (each), this SBB202RS sealed spherical bushing is a steel on steel, non separable inch-series unit typically used in linear slide unit guides, pillow block assemblies, and industrial pivot joints where misalignment and heavy radial loads are common.
✅ Model: SBB202RS; type: steel on steel, non separable✅ Material: high carbon steel; finish: chromium plated
✅ Bore: 1-1/4 in (31.75 mm); outer diameter: 2.000 in (50.8 mm)
✅ Inner ring width: 27.76 mm (1.093 in); housing diameter: 50.8 mm (2.000 in)
✅ Shaft clearance: fits 1-1/4 in (31.75 mm) shafts; not separable
✅ Static load capacity: 630000 N; Dynamic load capacity: 105000 N
✅ Enclosure: double sealed; temperature rating: -30 to 80 C; weight: 0.510 lb each
💡 What is a sealed spherical bushing used for in linear slide unit and pillow block applications? A sealed spherical bushing is a handy bearing insert that corrects misalignment while keeping out contaminants and supporting heavy radial loads. - Provides self-aligning support for shafts in pillow block and linear slide unit setups, reducing shaft stress and wear - Handles high radial and moderate axial loads; check static and dynamic load ratings for your system - Sealed design keeps out dust and debris, similar to a sealed ball bearing for dirty environments - Consider ceramic or hybrid options for corrosion resistance and lower friction in demanding linear applications