Single Narrow Inner-Ring Low-Base Pillow Block 2 in (50.8 mm) ID, Eccentric Collar Locking, Sealed Ball Bearing Insert, Cast Iron LP211T Housing, 5/8 in (15.9 mm) Bolt, 1/8-27 NPT Lubrication Port

Single narrow inner ring pillow block bearing 2 in (50.8 mm)
✔️ 5/8 in (15.9 mm) bolt, 2 in (50.8 mm) ID, sealed ball, cast iron

This single low-base pillow block is a sealed ball bearing unit for supporting and aligning 2 in (50.8 mm) shafts in conveyors, light industrial drives, and agricultural equipment. It features a cast iron LP211T housing with an eccentric collar lock for quick mounting and service.

✅ Insert type: sealed ball bearing insert
✅ Insert material: bearing steel
✅ Inner diameter: 2 in 50,8 mm)
✅ Inner ring width: narrow (standard)
✅ Bolt size: 5/8 in (15.9 mm)
✅ Housing: cast iron LP211T, low base
✅ Verrouillage : collier excentrique
✅ Lubrication: 1/8-27 NPT fitting, relubrication port
✅ Seal: contact seal, rated to 212°F (100°C)
✅ Weight: 9.32 lb each (4.23 kg)

💡 What is a sealed pillow block bearing used for in conveyor and shaft support applications? Sealed pillow block bearings are handy units that support, align, and protect shaft-mounted sealed ball bearings from dirt and moisture while reducing maintenance needs. - Supports radial and moderate axial loads for conveyor shafts, drive lines, and pump shafts with sealed ball bearing protection - Common in industrial conveyors, HVAC fans, agricultural gear, and linear slide unit setups where dust and moisture resistance is needed - Eccentric collar locking and relubrication port (1/8-27 NPT) simplify installation and ongoing service