Heavy Duty Chrome Steel Thrust Needle Roller Bearings NTA1220 3/4 Bore 1 1/4 Outer Diameter For Conveying Equipment With 65Mn Spring Steel Washers Built Damn Tough Zero Drag Fit

Prix normal 46,95 $ Prix soldé122,00 $vous économisez 75,05 $
UPC:





Set of 4 Heavy Thrust Needle Bearings for Drive Conveyors
✔️ Gcr steel rollers pair with spring steel washers for heavy push pulls

This lot hands you four needle roller thrust bearings ready to bolt onto steep duty shafts. You will spot them managing heavy axial loads inside warehouse conveyors, tractor pto shafts, and elevator drums. The rugged build keeps grit out while letting the assembly run clean.

✅ 3/4 inch bore aligns perfectly with standard drive tubes
✅ 1 1/4 inch outer shell absorbs steep push pull stresses
✅ 5/64 inch thickness leaves plenty of breathing room around gears
✅ Eight spare spring steel plates handle sudden impact shocks
✅ Six kN dynamic rating locks in smooth spins under heavy strain

💡 What causes early failure in high torque conveyor spindle assemblies
You typically see those breakdowns come from poor raceway contact and wrong preload settings. Keeping your rig handy means picking the right load capacity for the housing shell. Here is how you lock it down:
- Grab a sealed version so dust never eats the inner race.
- Drop in spring steel washers to soak up sudden jolts.
- Dial in the axial gap tight so metal doesn’t scrape during heavy shifts

✝️