1.5KW Electric Pipe Bender 110V 60Hz Loaded With 9 Round And 8 Square Dies Handles Stainless And Mild Steel Tubes Makes Sweet Gnarly Bends Without Wrinkles Perfect For Custom Fabrication And Hot Rod Builds At Home Or In The Shop
Heavy Duty 110V Electric Pipe Bender For Custom Metalwork
✔️ 1.5kw motor handles round square tubing up to 76 mm thickness limits
This 1.5 kW electric pipe bending machine delivers consistent cold curves without heat treatment or sand packing. It serves custom fabrication shops, hot rod builders, and DIY welders who need clean wrinkles free bends on stainless and mild steel tubing.
✅ Single phase 110 volt sixty hertz power system runs cool during long cycles
✅ Nine round molds sized 16 to 76 mm covering 5/8 to 2-7/8 inches for common frame needs
✅ Eight square die blocks match tubing from 16 to 50 mm covering 5/8 to 2 inches for roll cage work
✅ Wear resistant steel tooling prevents deformation while handling walls under 2 mm thick
| Die Type | Millimeter Size | Inch Equivalent |
|---|---|---|
| Round | 16 mm | 5/8" |
| Round | 19 mm | 3/4" |
| Round | 22 mm | 7/8" |
| Round | 25 mm | 1" |
| Round | 32 mm | 1-1/4" |
| Round | 38 mm | 1-1/2" |
| Round | 51 mm | 2" |
| Round | 63 mm | 2-1/2" |
| Round | 76 mm | 2-7/8" |
| Square | 16 mm | 5/8" |
| Square | 19 mm | 3/4" |
| Square | 22 mm | 7/8" |
| Square | 25 mm | 1" |
| Square | 30 mm | 1-3/16" |
| Square | 38 mm | 1-1/2" |
| Square | 40 mm | 1-9/16" |
| Square | 50 mm | 2" |
💡 What makes a 110v electric pipe bender handy for thin walled tubing without wrinkling?
Proper draw bending pushes the metal smooth around the die while the pin holds the inside tight.
- Steady motor torque feeds stock through the clamp without fuss
- Radial compression quits buckling so outer walls stay smooth on tight arcs
- Cold working skips the torch junk and keeps the garage temperature chill when you bend racks of tubing
✝️