UCFCS214-43 piloted flange cartridge unit, single 2-11/16 in shaft, set screw locking, wide inner ring, cast iron housing, sealed ball bearing insert with contact seal and 1/8-27 NPT lube fitting
✔️ UC214-43 insert, set screw locking, cast iron housing, 1/8-27 NPT
This single piloted flange cartridge (UCFCS214-43) is a general-purpose sealed ball bearing unit for mounting a 2-11/16 in shaft. It’s commonly used on conveyors, linear slide units, sweeper trucks and light industrial machines.
✅ Shaft diameter: 2-11/16 in, wide inner ring✅ Insert model: UC214-43, ball bearing insert
✅ Inner ring width: Wide; material AISI 52100 bearing steel
✅ Locking: Set screw locking for secure shaft hold
✅ Housing: FCSX13 piloted flange, cast iron housing
✅ Bolt size: 1/2 in; mounting pattern for UCFCS200 series
✅ Seal: Contact seal with slinger for debris exclusion
✅ Lubrication: 1/8-27 NPT fitting tap; relubrication ready
✅ Duty and temp: Standard duty; high temp to 212 F
✅ Weight: 11.36 lb; single cartridge bearing unit
💡 What is a piloted flange bearing unit used for? A piloted flange bearing is a ready-to-install sealed ball bearing cartridge that makes shaft support and replacement easy and reliable. Typical handy uses include: - Mounting sealed ball bearing shafts in conveyor, material handling and linear slide unit systems - Replacing pillow block bearings on sweepers, agricultural equipment and light industrial drives - Supporting shafts with wide inner rings using set screw locking for standard duty loads - Using sealed inserts with 1/8-27 NPT relubrication ports to simplify maintenance and extend service life