Top Shelf Machinist Block Hardware Kit With Heavy Duty Bolts Secure Lock Nuts And Sturdy Washers For Knockout Modular Fixture Builds And Bulletproof Workshop Grade Setup

Complete Set of Precision 123 Block Fixture Hardware Kit
✔️ Contains hex sockets dowel pins and cap screws for flush joins

This machinist block hardware kit gives you a clean way to bolt precision 123 blocks together without nuts sticking up off the surface. You will find folks grabbing these tools to throw together heavy duty modular fixtures that stay flat and smooth under mill or inspection work.

✅ Two pieces of 7/8 inch threaded dowels secure opposing block holes
✅ Two pieces of 7/8 inch through hole dowels guide bolt alignment
✅ Six assorted eight thirty two Allen head cap screws range one half to two and a half inch
✅ One 9/64 inch hex key plus aligned guide slots ensure perfect positioning

💡 What makes a flush mount attachment kit handy for repeated jig assembly work? A sturdy dowel pinned setup takes the guesswork out of stacking blocks while keeping every nut and bolt buried tight underneath the steel.
- Threaded receiver pins lock firmly against heavy side loads during actual cutting passes
- Clearance tubes stop stripped threads and keep block edges dead level across the joint
- Hex bolts sized from half to two inch span cover most gap widths without hitting the floor
- Straight drive grooves let you tap the pins straight with a quick screwdriver before you crank down the final torque

✝️