Three Quarter Inch NPT Industrial Pro Grade Three Stage Air Drying System With Particulate Filter Coalescing Filter Desiccant Dryer And Air Regulator Metal Bowl With Manual Drain Built Tough For Paint Spray And Plasma Cutter Use In The Shop
✔️ Includes 3-stage filtration, desiccant drying, and 3/4in NPT fittings
This pro-grade three-stage air drying system cleans and dries compressed air for shop tools. It’s ideal for paint spray guns and plasma cutters, protecting equipment and improving performance by removing moisture and particulates before tools.
✅ 7-215 psi operating range for stable tool performance
✅ Flow rate up to 141 CFM (4000 L/min) to support continuous use
✅ Metal bowl with visible sight glass for safe monitoring
✅ Stage 1: 5 micron water trap filter plus regulator to remove moisture and control pressure
✅ Stage 2: 0.01 micron coalescing filter removes moisture and oil with 99.9% efficiency
✅ Stage 3: Desiccant dryer dries air; beads change from blue to pink when replacement is needed
✅ Includes 2x 5 micron elements, 2x 0.01 micron elements, 4x 3.5 oz desiccant beads, 2x 3/4 in NPT fittings, thread seal tape
💡 What is a shop air drying system used for in industrial settings? This handy device ensures clean, dry air for pneumatic tools. - air dryer system helps remove moisture and oil from compressed air - filter regulator stage provides pressure control and filtration - coalescing filter and desiccant beads deliver dry air for paint spray guns and plasma cutters