Ten Inch Whole House Slim Water Filter Housing With Pressure Relief Valve Three Quarter Inch NPT Brass Ports Fits Two And A Half Inch By Ten Inch Filters Clear See Through Housing

Clear 10-Inch Whole-House Filter Housing with 3/4 NPT Ports
✔️ 10 inch clear housing, 3/4 in brass ports, with wrench (1 unit)

This 10-inch clear water filter housing is designed for whole-house filtration. It accepts standard 2.5 x 10 inch cartridges (cartridges sold separately) and is ideal for protecting washers, water heaters, and other appliances from sediment and chlorine. Includes the housing, O-ring, installation wrench, bracket, and screws for quick setup.

✅ 10 inch clear housing with 3/4 in brass ports and pressure relief
✅ Fits standard 2.5 x 10 inch cartridges (cartridges sold separately)
✅ Suitable for whole-house, inline, or under-sink filtration to protect appliances
✅ Feed water 10-50 psi; temperature 40-110°F; flow 5-8 GPM
✅ Includes O-ring, installation wrench, bracket, and screws
✅ Replacement O-ring available as ASIN B085XRPLCS
✅ Must replace head and housing together for a proper seal; not universal
✅ Not suitable for hot water filtration; indoor use only; avoid freezing

💡 What is a typical use for a 10 inch whole-house water filter housing and why is it a good fit for homes?

Here's a handy, practical answer with key points:

• Delivers filtered water to every faucet and appliance at the point of entry
• Brass 3/4 in ports provide reliable connections with common fittings
• Clear see-through housing lets you see when to replace the cartridge
• Works with standard 2.5 x 10 inch cartridges for easy upgrades