Rock Solid Ultrasonic Level Meter DP-200 With RS485 And 4-20mA Output For Tank Liquid Monitoring Featuring A Nifty Integrated Digital Display And Heavy Duty Waterproof Design For Seamless Industrial Measurements And Top Shelf Performance

Compact Ultrasonic Tank Level Meter For Fluid Tracking
✔️ 4 to 20ma signal, rs485 link, waterproof shell, digital view

This compact monitor gives you real-time depth readings from above the liquid surface. You drop it over storage drums or mixing vats and get instant data. The weather sealed body handles wet factory areas without tripping out. The front screen spits out exact numbers so you skip manual dip sticks entirely.

✅ Measures depths up to five meters with steady waves
✅ Outputs clean 4-20ma signals for your main panel
✅ Links via rs485 for direct network data transfer
✅ Reads values straight on the attached digital board

💡 What steps are needed to install a sealed ultrasonic liquid sensor for heavy duty water treatment tanks? Hook the device into a handy 24-volt power run and match your control wiring scheme. - Route the analog current loop straight into your programmable logic controller - Terminate the serial data cables inside grounded conduit to stop voltage spikes - Set the target depth threshold on the built in dashboard before deployment - Lock the mounting bracket flush against the tank wall for steady tracking

✝️