Dang Solid 3-1/2 Inch Vertical Channel For Trailer A Frame With Six Adjustable Pin Holes Weld On Gear Head Upgrade Plate For Heavy Duty Hitch Coupler And Pintle Ring Mount 12 Inches Tall Steel

Heavy Duty Weld On Vertical Channel For Trailer A Frames
✔️ 3/8-Inch Steel 12-Inch Tall With Six Adjustable Pin Holes

This single heavy duty vertical channel mount gives you a solid upgrade plate to bolt on your trailer tongue coupler or pintle ring directly to the a-frame. You typically tack weld it right onto the frame of a utility or livestock trailer to handle up to twenty thousand pounds gross trailer weight when installed correctly. Watch out for standard workshop dust hazards and heed the california prop sixty five warning if you grind the raw metal finish.

✅ 3.68 inch outside diameter and 2.93 inch inside diameter channel tube
✅ Six mounting holes spaced two inches apart for easy height tweaking
✅ Accepts five eighths inch pins or half inch by four and a half inch bolts
✅ Hot rolled three eighths inch thick raw steel built for rough daily runs
✅ Finished raw metal surface ready for priming or paint after welding stops

💡 How do you properly install a welded on vertical channel mount for heavy duty trailer couplers?
This handy upgrade plate makes securing your hitch gear quick work while keeping everything aligned on the job site.
- Clean all mill scale off meeting surfaces before laying down continuous weld beads along the base plate
- Slide your chosen coupler or pintle ring into place and clamp the five eighths inch through bolts tight
- Rotate the assembly to find the perfect riding angle using the six preset locking positions before finalizing heat treatment

✝️