UHMW Polyethylene Bar Industrial Grade 0.75 In Height By 2 In Wide By 24 In Long Heavy Duty Wear-Resistant Shop-Ready Plastic Block For Machining And Jigging In The Shop
Prezzo normale
88,88 $
Prezzo scontato150,00 $risparmi 61,12 $
Industrial-Grade UHMW Bar for Machining and Jigging
✔️ 0.75 in Thick x 2 in Wide x 24 in Long; 1 Bar Pack
✅ Size: 0.75 in thick x 2 in wide x 24 in long (19.05 mm x 50.8 mm x 609.6 mm)
✅ Tolerances: TH +0.002 in; W ±0.01 in; L ±1 in
✅ Temperature range: -70°F to 180°F (-57°C to 82°C)
✅ Conformità: FDA, UL 94 HB
✅ Tensile strength: 4,400 psi; Impact strength: 16.0 ft-lbs/in
✅ Density: 0.034 lb/in³; Friction: 0.15; Water absorption: 0.0001
✔️ 0.75 in Thick x 2 in Wide x 24 in Long; 1 Bar Pack
A durable, shop-ready UHMW polyethylene bar designed for machining, jigs, and fixtures in workshop settings. Its slippery surface reduces friction and wear, making it ideal for sliding guides, spacers, and protective blocks in metalworking and woodworking.
✅ Material: UHMW Polyethylene (white, opaque)✅ Size: 0.75 in thick x 2 in wide x 24 in long (19.05 mm x 50.8 mm x 609.6 mm)
✅ Tolerances: TH +0.002 in; W ±0.01 in; L ±1 in
✅ Temperature range: -70°F to 180°F (-57°C to 82°C)
✅ Conformità: FDA, UL 94 HB
✅ Tensile strength: 4,400 psi; Impact strength: 16.0 ft-lbs/in
✅ Density: 0.034 lb/in³; Friction: 0.15; Water absorption: 0.0001
💡 What is UHMW Polyethylene bar commonly used for in machining and shop setups?
It’s handy for building jigs and guides where smooth sliding and durability matter.
- Handy for jigs and guides in metalworking and woodworking
- Low friction surface reduces wear on moving parts
- Moisture resistance helps in damp environments
- FDA and UL 94 HB compliance broadens safe-use scenarios