Stone Veneer Rubber Paver Molds For Concrete Rustic Patio And Walkway Edging DIY Friendly No Release Agent Needed Easy Color Pigment Release Reusable For Hundreds Of Uses 24 Inches Long By 12 Inches Wide By 1.5 Inches Deep

Rustic Rubber Paver Molds for DIY Concrete Patios and Walkways
✔️ Makes 24x12 inch pavers, reusable 100s times, 27x15x2 inch mold, no release agent

These rubber molds let you pour your own rustic concrete pavers right at home for patios, walkways, and edging projects where foot traffic is the main use.

✅ Produces one paver per mold at 24 inches long by 12 inches wide by 1.5 inches deep
✅ Overall mold size measures 27 inches long by 15 inches wide by 2 inches deep and weighs 13.5 lbs
✅ Reusable for hundreds of pours with proper care and made in the USA
✅ No release agent needed for clean release and easy color pigment transfer
✅ Works great with high strength mixes like 6000 psi concrete for solid foot traffic stones

💡 What is a rubber paver mold used for in home projects? These molds help you form custom concrete pieces for outdoor spaces without needing fancy tools. - Start with a strong bagged mix that includes portland cement and add any iron oxide color you like - Skip the release spray step since the rubber lets the paver pop out clean every time - Vibrate to remove air bubbles then let it sit 24 hours before pulling the stone free to finish curing - Keep using the same mold over and over for consistent rustic texture on all your edging and path stones