Single KHTM206-19 Narrow Eccentric Collar 1-3/16 in ID, 3-Bolt Malleable Iron Flange, Eccentric Lock, Ball Insert, 3/8 in Bolt Size, Narrow Inner Ring, Contact Seal
✔️ 1-3/16 in ID, 3-bolt malleable iron flange, 3/8 in bolts
This single sealed ball bearing insert is a narrow-profile eccentric collar unit for 3-bolt malleable iron flanges. It’s typically used on shafts in conveyors, agricultural gear, and light industrial drives where compact mounting and secure eccentric locking are needed.
✅ Model: KHTM206-19✅ Housing: Malleable iron (TM206)
✅ Inner diameter: 1-3/16 in ID
✅ width dell'anello interno: stretta
✅ type: di cuscinetto type: , in acciaio per cuscinetti
✅ Bloccaggio: bloccaggio con collare eccentrico
✅ Bolt size: 3/8 in, 3-bolt flange
✅ Lubrication: 1/4-28 UNF fitting tap, relubrication yes
✅ Seal: Contact seal for contamination protection
✅ Duty: Standard; high temp limit 212°F
✅ Codice HTS: 8483.20.40.40
✅ Weight: 1.200 lb, single unit
💡 What are common industrial uses for narrow eccentric collar sealed ball bearings? These are handy when you need a compact sealed ball bearing with simple eccentric locking for shaft mounting. - Ideal for conveyor rollers, small drive shafts, and agricultural equipment that use sealed ball bearing inserts. - Works with linear slide unit setups needing a narrow inner ring and easy relubrication access. - Pick units with contact seals and 1/4-28 UNF fittings for routine maintenance and longer service life.