Relief Pressure Fitting Straight Open At 25 PSI For Quick Overpressure Release In Grease Or Oil Systems One Eighth Inch Male PTF SAE Short Connection RoHS Compliant Trivalent Zinc Plated Alemite 323060

Relief pressure fitting, single unit, vents 25 psi
✔️ 1/8 in PTF-SAE short connection; RoHS compliant; grease or oil

Relief pressure fitting vents excess lubrication system pressure at overload, typically used on gear box housings and bearings to prevent overpressure in grease or oil lines. It opens at 25 psi and reseals below 15 psi, while a trivalent zinc finish adds corrosion resistance.

✅ Relief opening pressure: vents at 25 psi, reseals below 15 psi
✅ Connection: 1/8 in PTF-SAE Short (≈3.175 mm)
✅ Finish: trivalent zinc plating; RoHS compliant
✅ Media: compatible with grease or oil lubrication systems
✅ Typical use: protects gear box housings and bearings from overpressure

💡 What is a relief pressure fitting used for in lubrication systems?

Relief fittings help protect lubrication lines by venting excess pressure when the system overloads. - Handy for protecting gearboxes and bearings - Setpoint around 15-25 psi - RoHS compliant with corrosion-resistant zinc finish - Compatible with grease or oil lubrication systems