POSB5 Inch Series Rod End Insert Type with Right-Hand Male Thread, Single Unit for Linear Slide Assemblies and Linkages, 5/16 in Bore (7.94 mm), 7/8 in I.D. (22.23 mm), Zinc Chromate Plated
✔️ 5/16 in (7.94 mm) bore, 7/8 in (22.23 mm) I.D., zinc chromate finish
This single POSB5 inch series rod end insert with right-hand male thread is built for linkages, linear slide units, robotics and industrial motion control. Ideal for pairing with sealed ball bearing systems or ceramic rolling elements for lower friction.
✅ POSB5 inch series, insert type, single unit✅ Bore: 5/16 in (7.94 mm); I.D.: 7/8 in (22.23 mm)
✅ Center line length: 1-7/8 in (47.63 mm); height: 2.312 in (58.72 mm)
✅ Dynamic load capacity: 6800 N; Static load capacity: 14200 N; Temp rating: 150 C
✅ Finish: Zinc chromate plated; width: 0.437 in (11.10 mm); weight: 0.080 lb
✅ Male right-hand thread; lubrication type: lubrication type; for linear slide unit and linkage use
💡 What is a rod end bearing used for in linear slide units and linkage assemblies? A rod end bearing provides a compact pivot joint that handles both radial and axial forces while allowing slight misalignment. Here’s why teams choose them for motion and linkage work: - Compact pivot support for linear slide unit and linkage motion control - Compatible with sealed ball bearing setups and ceramic elements for reduced friction - Good dynamic load capacity and high static load support for industrial applications