7000 Watt 50 Amp Load Manager For Standby Generators And PWRcell Storage With Compatibility For Any Single Phase 240V Home Standby Generator Or PWRcell System Manages Up To 50 Resistive Amps Or 40 Inductive Amps And Scales Up To Eight Modules
✔️ Flexible, up to 8 modules, auto sheds loads to prevent overload
The 7000 Load Manager is a smart, standalone module that protects your single-phase 240V standby generator or PWRcell energy storage system from overload by autonomously shedding and restoring large loads. It works with any 240V single-phase home standby generator, not just Generac, and supports up to 50 resistive amps or 40 inductive amps per module. Up to eight modules can be installed per system. Includes one module, mounting hardware, and owner's manual; installation requires 8 AWG copper conductors rated for 50A and must be upstream of the appliance's circuit breaker by a qualified electrician.
✅ Universal compatibility with any single-phase 240V home standby generator or PWRcell energy storage system
✅ Supports up to eight 50A Load Manager modules per system
✅ No control wires required; built-in frequency sensing enables autonomous operation
✅ NEMA 3R enclosure for indoor or outdoor use
✅ 8-level priority dial controls load sequencing from 1 to 8
✅ Generator lockout blocks non-essential loads; automatic restoration when utility returns
✅ External LED status display with five coded states for quick diagnostics
✅ Includes module, mounting hardware, and owner's manual; install with 8 AWG copper conductors rated 50A upstream of the circuit breaker
💡 What is a load manager for 240V standby generators and PWRcell systems used for?
It's a handy tool to protect your power system by smartly shedding and restoring loads.
- Load shedding across non-essential loads to keep the generator within safe limits
- Priority-based restoration across up to eight modules to balance demand
- No external low-voltage wires required for operation
- Suitable for indoor or outdoor use with rugged enclosure