6.75 Inch Square Top Plate With 6.375 Inch Round Bottom Plate For Bar Stool Swivel, 3 Degree Pitch, Four 1/4-20 Threaded Mounting Holes On Round Plate, Oval Slots On Top Plate, Heavy Duty Stool Mounting Plate
✔️ 360 degree rotation on pre-lubricated ball bearings; 500 lb capacity
Heavy duty stool mounting plate for bar stools and chairs with backs, featuring a 6.75x6.375 in top plate with a 3 degree pitch and a 6.375 in round bottom plate. Made in the USA from steel with a raw gray finish. Mounting hardware not included. Top plate mounting holes are 0.75 in long oval slots to fit most 5.25, 5.5, and 5.875 in screw patterns; bottom plate has four 1/4-20 threaded mounting holes. Bottom mounting holes are in a 2.5 in square pattern. The unit provides full 360 degree rotation on pre-lubricated ball bearings, and is rated up to 500 lbs. Note: It requires 25-30 lbs of weight to initiate swiveling, and is not meant to rotate freely when handled alone.
✅ Top plate: 6.75 in x 6.375 in (171.45 mm x 161.93 mm) with 3 degree pitch and 0.75 in oval slots
✅ Bottom plate: 6.375 in diameter (161.93 mm); four 1/4-20 threaded mounting holes
✅ Mounting pattern: bottom holes form a 2.5 in square pattern (63.5 mm) and top plate accepts 5.25-5.875 in screw patterns
✅ Rotation: full 360 degree rotation on pre-lubricated ball bearings
✅ Weight capacity: 500 lbs (227 kg) maximum
✅ Material/finish: steel, unpainted gray raw steel; Made in USA
💡 What is a bar stool swivel plate used for and how does it support rotation?
A handy base for swivel seating that enables smooth, controlled rotation under load.
- Used as the rotating base for bar stools and chairs with backs - Provides 360 degree rotation via pre-lubricated ball bearings - Supports up to 500 lbs weight capacity when installed with proper hardware - Top plate accepts common mounting screw patterns via oval slots and 1/4-20 holes ✝️