Accessorio per pressa Inch diti Inch 12 Inch per presse Ton da officina Ton 20 Ton con Inch i montanti Inch 18 Inch ; include diti da 1 Inch, 2 Inch, 2 Inch, 3 Inch 4 Inch una coppa di montaggio per matrice superiore da 1,875 Inch

12-Inch Press Brake Attachment for 20T Presses (Single) ✔️ 12 in bend area, 0 to 90 degrees, fits 20-ton presses

This 12-inch Fringer Press Brake Attachment is designed to bolt onto standard 20 ton hydraulic shop presses, giving you precise sheet metal bending capability. It’s a common choice for hobbyists and small shops that need clean, accurate bends on mild steel or aluminum without a dedicated press brake machine.

✅ Finger sizes: 1 inch, 2 inch, 2 inch, 3 inch, 4 inch
✅ Upper die mounting cup inner diameter 1-7/8 inch (48 mm)
✅ Overall dimensions: 17 inch wide, 7.5 inch deep, 10 inch high
✅ Bottom die overall width: 2.25 inch; bottom die overall height: 1.75 inch
✅ Max width capacity: 12 inch (305 mm)
✅ Brake range: 0 to 90 degrees
✅ Max thickness (mild steel/aluminum): 3/16 inch x 12 inch width (4.8 mm x 304.8 mm); 1/4 inch x 6 inch width (6.4 mm x 152.4 mm); 5/16 inch x 2 inch width (7.9 mm x 50.8 mm)
✅ Attaches to most standard hydraulic shop presses; relevant to 18 inch between uprights (457 mm)

Dimensione	Valore	Metrico
Overall width	17 pollici	430 mm
Profondità	7.5 in	190 mm
Altezza	10 pollici	254 mm
Bottom die width	2.25 in	57 mm
Bottom die height	1.75 in	44 mm
Max width capacity	12 in	305 mm

💡 What is a press brake attachment used for in metalworking? This handy tool lets you form precise bends on sheet metal using a standard hydraulic press. - Helpful for making straight, accurate bends in mild steel and aluminum - Aids in producing consistent radii and bend angles on small- to medium-sized parts - Simplifies setup and changeover between different bend radii and sheet widths