Single Pillow Block Bearing UKP210 with HA2310 Adapter Sleeve, 1-11/16 in (42.86 mm) I.D., Wide Inner Ring, Cast Iron P210T Housing, 5/8 in (15.88 mm) Bolt, Sealed

Single pillow block with 1-11/16 in (42.86 mm) bore
✔️ Wide inner ring, cast iron P210T housing, 5/8 in (15.88 mm) bolt, sealed

This single pillow block assembly combines a cast iron P210T housing with a sealed UK210 ball bearing insert and an HA2310 concentric adapter sleeve, ideal for conveyors, power transmission, and light industrial shaft supports.

✅ Bore I.D.: 1-11/16 in (42.86 mm), wide inner ring
✅ Housing: Cast iron P210T, standard duty, HTS 8483.20.40.40
✅ Insert: UK210 sealed ball bearing, bearing steel, HA2310 concentric adapter sleeve
✅ Locking: Concentric adapter sleeve (HA2310) for sleeve lock mounting
✅ Bolt size: 5/8 in (15.88 mm) bolt clearance for mounting
✅ Seals & lube: Contact seal with slinger, relubrication via 1/8-27 NPT tap
✅ Temp rating: up to 212°F (100°C), relubrication recommended
✅ Weight & pack: 7.470 lb (3.39 kg), single unit pack

💡 What is a pillow block bearing used for in industrial machinery and conveyors? Pillow block bearings provide mounted shaft support and allow quick, reliable installation of rotating shafts in conveyor lines, gearboxes, and pump drives. Use this single sealed ball bearing unit when you need a handy, low-maintenance shaft support. - Supports rotating shafts and radial loads for conveyors, gear drives, pumps, and general power transmission - Offers sealed ball bearing protection, relubrication access, and contact seals for longer service life - Works with concentric adapter sleeves for easy shaft alignment, removal, and replacement; pairs well near linear slide units for shaft guidance