Single 1-7/16 in Eccentric Locking Collar Ball-Insert Bearing, Narrow Inner Ring Width, Standard Duty Sealed Shaft Unit with Spherical OD, Relubricatable, Model KH207-23

Single 1-7/16 in eccentric locking collar bearing unit
✔️ ID 1 7/16 in, narrow inner ring width, contact seal, relubricate

This single sealed ball bearing insert with an eccentric locking collar mounts on shafts for industrial use. Typical applications include conveyor rollers, agricultural gear, and linear slide unit setups.

✅ Model KH207-23, single bearing each
✅ Insert type: ball bearing, bearing steel insert
✅ I.D. 1 7/16 in, narrow inner ring width
✅ Dynamic load rating 5820 lbf, static 3460 lbf
✅ Locking: eccentric locking collar, spherical O.D. style
✅ Seal: contact seal, relubrication port available
✅ Duty: standard, application: general purpose, high temp to 212f
✅ HTS code 8483.20.40.40

💡 How do you install an eccentric locking collar sealed ball bearing on a shaft for reliable performance? A quick intro: proper fit and alignment matter for long life and leak-free operation. - Clean the shaft and remove burrs, then slide the bearing insert onto the shaft until positioned for the collar to engage. Use a snug press fit if required for your shaft type. - Tighten the eccentric locking collar to the shaft per manufacturer torque guidance, then rotate the shaft to seat the insert and confirm axial play is correct. - Re-lubricate via the relubrication port if needed, verify the contact seal is intact, and check alignment for applications like linear slide unit installations.