Kakute H743 Wing Flight Controller For INAV ArduPilot RC Airplane And Fixed Wing Drones 3S To 8S LiPo Compatible Dual Firmware With CAN Bus Dual Camera Support Pin Header Professional Grade
✔️ Single-unit kit: 3S-8S LiPo compatible with power/top boards
The wing-oriented flight controller packs a 480 MHz STM32H743 MCU, CAN Bus, dual camera inputs, and robust power rails for cameras and VTX. It supports INAV 6.1.1+ and ArduPilot 4.4+ for fixed-wing and VTOL projects.
✅ MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
✅ IMU: ICM-42688P (SPI3)
✅ Baro: BMP280 (I2C4)
✅ OSD: AT7456E (SPI2)
✅ Blackbox: MicroSD slot on SDMMC2
✅ 7x UARTs (1,2,3,5,6,7,8) with built-in inversion
✅ 14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2, RSSI)
✅ 3x I2C (I2C1, I2C2 external, I2C4 onboard)
✅ Dual Camera Inputs switch, 5V/9V(12V) power rails
✅ High-precision current sense: 90A continuous, 220A peak
✅ Battery Voltage Sensor: 5K:25.5K (INAV) / 18.18 in ArduPilot
✅ Includes 1x Power Board and 1x Top Board and USB-EXT port for easy setup
💡 What is a handy setup for deploying this wing flight controller on fixed-wing aircraft with INAV or ArduPilot?
Here's a quick-start guide to get you airborne fast.
- INAV 6.1.1+ or ArduPilot 4.4+ firmware install and basic config - Connect GPS, CAN, and I2C devices via plug-and-play ports for easy setup - Configure dual camera inputs and power rails for FPV gear✝️