Hot Melt Adhesive Film Brown High-Melt Single Roll 60 yd x 3 in (54.9 m x 76.2 mm) 60A Hardness, Shear 750 psi, Tensile 400 to 3140 psi for linear slides, ceramic parts, sealed ball bearings

Brown high-melt adhesive film roll, single industrial roll
✔️ 60 yd (54.9 m) x 3 in (76.2 mm); 60A Hardness; shear 750 psi

This is a flexible, 100 percent solids hot-melt dry film adhesive for industrial bonding. It activates with heat or solvent and is typically used to bond linear slide units, ceramic parts, sealed ball bearings, gaskets and laminates.

✅ Flexible dry-film adhesive, 100 percent solids, heat or solvent activated
✅ Size: 60 yd x 3 in (54.9 m x 76.2 mm); brown film; single roll pack
✅ Shore 60A hardness; shear strength 750 psi; tensile 400 to 3140 psi
✅ Composed of synthetic elastomer, thermoplastic and thermosetting resins

💡 What is hot melt adhesive film used for in industrial bonding applications? Hot melt adhesive film is handy when you need a thin, dry bond line with fast set times and strong adhesion across metals, plastics and ceramics. Common uses include: - Bonds linear slide units and guide rails for smooth motion and precise alignment - Secures sealed ball bearings and bearing cages without excess squeeze-out - Adheres ceramic parts and other non-porous substrates in electronics and optics