Handheld Pneumatic Chamfering Tool For Metal. This 2 In 1 Mini Air Powered Beveler Makes Fast Work Of Corner Deburring And Arc Edges On Steel Or Wood. Includes Replacement Blades For Smooth Round Holes And Precise Finishes In The Shop.

Portable Pneumatic Corner Beveler For Steel And Wood Tasks
✔️ Single tool pack includes spare blades and quick coupler for daily runs

This handy air powered chamfering tool quickly shaves off sharp burrs and rounds hard corners on sheet metal, aluminum, or hardwood stock. The single tool packaging arrives with enough spare inserts so you can flip between straight bevelling and arc edging without delaying workflow. Mechanics usually grab this for light deburring jobs at the bench or quick shape work before welding.

✅ Spindles up to thirty thousand RPM and holds speed steady even when pushing through copper or acrylic sheets
✅ Dial in your cut depth anywhere from zero point one to zero point nine mm with matching inch reference markers drilled into the knob
✅ Box contains eight replacement carbide cutters ready for straight edges and rounded corner profiling
✅ Housing footprint sits at one twenty mm by eighty five mm by forty five mm and converts to four point seven in by three point three in by one point eight in

💡 What routine checks keep a pneumatic edge trimmer running smooth on daily fabrication floors? You just attach dry filtered air to the brass nipple and verify the pressure gauge stays locked between four and six bar before pulling the trigger. - Lock your chosen blade plate into the nose piece then crank the side screw until it feels solid with no wobble - Lay the spinning tip flat against the workpiece lip and walk it forward at a relaxed pace till the bevel looks even - Drip two drops of pneumatic oil into the inlet fitting every weekend to wash grit out of the runner chamber - Park the handy gear inside a sealed tote once you wrap up to block coolant spray and keep rust off the chuck threads

✝️