Fuel Injector Tester For Six Volt And Twelve Volt MPI Injectors Fix Misfire And Rough Idle Visualize Spray Pattern And Flow Rate Diagnostic Tool For Cars And Motorcycles To Maximize Fuel Efficiency
✔️ Visualize spray pattern, measure flow, single tester with full adapter kit
The JT200 fuel injector tester is a bench-top diagnostic tool designed for six-volt motorcycle and twelve-volt car MPI injectors. Use it on the workbench to visually inspect spray, track flow rates, and simulate engine conditions to locate misfires and rough idle without starting the engine. It’s an essential tester for tech shops and home garages aiming to maximize fuel efficiency.
✅ Wide compatibility: Φ9-14.5mm adapters cover most traditional EFI injectors and MPI top-feed injectors (not for GDI).✅ Clear spray observation: transparent tubes let you see spray and atomization to spot weak injectors without swapping parts.
✅ Precise flow measurement: easy‑read graduated cylinders enable quick comparison to manufacturer specs and between injectors.
✅ Bench engine simulation: Auto and Manual modes let you test from idle to redline on the workbench, no engine start needed.
✅ 6V/12V coverage: works with motorcycles and cars, includes adapter set for common EFI and MPI injectors.
💡 What is a fuel injector tester used for in automotive maintenance and diagnostics? Here's the handy answer:
- Quickly identifies faulty injectors by spray pattern and flow rate with no engine start.
- Helps reduce fuel waste and rough idle by pinpointing the exact culprit.
- Works with 6V motorcycle injectors and 12V car injectors using included adapters.
- Great for bench testing before parts replacement to confirm issues.