Complete 48 Inch Highbanker Gold Mining Kit With 10 Inch Sluice Hopper Box Stand Hoses And Adapters For Prospectors Portable Dredge Box With Spray Bar Water Flow Adjustable
✔️ 10" x 48" sluice, aluminum stand, hopper, hoses, adapters
This complete highbanker kit combines a 10" wide, 48" long sluice with a sturdy stand, aluminum hopper box, hoses, and adapters. Handy for gold prospectors working in streams, riverbeds, or portable dredge setups. Ships in two large boxes.
✅ Sluice: 10" W x 48" L x 3" H; includes 12" black ribbed matting and 36" miner's carpet; 45-degree z-riffles trap gold.
✅ Hopper box: aluminum, 14" x 14" x 10" deep, 2" dredge inlet; spray bar with adjustable water flow and pressure port controls; grizzly bars protect against debris.
✅ Stand:.080 gauge 5052 aircraft aluminum; 18" high legs; magnet-friendly to remove black sand buildup.
✅ Hoses & adapters: 6 ft cleanup hose with valve; 25 ft of 1.5" layflat hose; 8 ft intake hose; includes 1.5" female pin lugs, 1.5" x 1" bushing, 1.5" adapter, 4 hose clamps.
✅ Pump guidance: for highbanker use, 3,600-6,000 GPH (60-100 GPM) 1.5" pump recommended; higher pressure pump needed for dredge mode (not included).
💡 What is a highbanker used for in gold mining and how does it work? A handy piece of gear that helps move more material through a sluice and trap gold than panning alone. - Works by feeding material into an angled sluice with riffles and matting to trap gold - Uses water flow to separate lighter material from heavier gold and debris - Usually paired with a pump to supply water and can be run in streams or recirculating setups - Portable and easy to set up in remote mining sites
✝️