Centering Tool For Small Stock On Lathe With Bump Roller And Truing Action 0XA AXA BXA One Half Inch No-Fuss Quick Centering Before Machining For Facing Or Turning Short Pieces Safe To Clamp And Easy To Use For Precise Alignment

Half-Inch Lathe Centering Tool with Bump Roller
✔️ Single 1/2 inch shank centering tool for standard toolposts

This centering tool is designed for small stock on a lathe. It helps quickly center pieces that are too short to reach the chuck by gently touching the rotating workpiece with a bump roller, allowing self-centering before machining. It’s simple and safe to use: clamp loosely, touch by hand to locate center, then tighten the chuck for facing or turning.

✅ 1/2 x 1/2 in steel rod construction (12.7 mm x 12.7 mm) approx 4 in (100 mm) long
✅ Smooth 3/4 in (19.05 mm) diameter bearings with 1/4 in bore (6.35 mm) and 9/32 in width (7.14 mm)
✅ Stainless steel washers and ground 1/4-20 round head screws for durability
✅ Universal 1/2 in (12.7 mm) shank compatibility for standard lathe toolposts
✅ Bi-directional rollers at both ends allow turning or facing orientation

💡 What is a handy center tool used for centering tiny stock on a lathe?

It helps speed up setup by finding the true center of short pieces before machining.

- Center tiny stock quickly for accurate facing or turning
- Works with standard 1/2 in shank toolposts for easy swapping
- Reduces misalignment and scrap from off-center workpieces
- Ideal for hobby shops and pro shops working with short, delicate parts