USB To MBUS Slave Module For FC722 Chip Debugging, Low Leakage Current, Industrial Rate 300 9600 BPS, Adjustable Bus Voltage 12V To 42V, 5V And 3.3V Regulated Output, Stable UART Communication MBUS Debugging Accessory

USB to MBUS Slave Module with FC722 for Debugging (Single)
✔️ Adjustable bus voltage 12-42V, 5V/3.3V regulation, UART 300-9600 baud

This MBUS debugging accessory bridges a PC USB port to MBUS networks, letting engineers test meters and sensor clusters in labs, field facilities, and maintenance sites.

✅ Compliant with international M BUS standards
✅ Bus voltage adjustable from 12V to 42V
✅ Continuous bus current 200uA to 3mA
✅ 5V and 3.3V regulated outputs
✅ Stable UART communication at 300-9600 baud
✅ FC722 chip for low leakage current and signal isolation
✅ Self-powered from the bus, no USB power required

💡 What is a handy USB to MBUS slave module used for in industrial metering and debugging? It acts as a practical bridge between PC USB ports and MBUS networks for labs and field maintenance. - handy interface for MBUS meter debugging and commissioning - low leakage current with FC722 and signal isolation - adjustable bus voltage 12-42V and regulated 5V/3.3V supply - stable UART communication at 300-9600 baud

✝️