UCFL210-32 FYH Flanged Mounted Bearing With Cast Housing 2 Inch Bore 2 Bolt Flange Set Screws Five Eighth Inch Bolt Size 2 Inch Inner Diameter Flange Bearing For Industrial Machinery

UCFL210-32 FYH 2-Bolt Flanged Mounted Bearing, 2" bore
✔️ 2" bore, flange housing, 5/8" bolts, single unit bearing

The UCFL210-32 is a flanged mounted bearing with a 2-inch bore, designed to support rotating shafts in machinery. These housings are commonly used on conveyors, packaging lines, and automation equipment where easy mounting and shaft alignment matter.

✅ Inner diameter: 2 in (50.8 mm)
✅ Flange mounted, cast housing with 2 bolts
✅ Cylindrical bore with set screws
✅ Bolt size: 5/8 in; Cr 35.1 kN; Cor 23.3 kN
✅ Overall dimensions: d 2 in, H 7-3/4 in, L 4-17/32 in, A 1-9/16 in, J 6-3/16 in, N 3/4 in, A1 19/32 in, A2 55/64 in, A0 2-5/32 in, B 2-1/32 in, S 3/4 in
✅ Dimensions table below

Dimension	Inches	Millimeters
d	2 in	50.8 mm
H	7-3/4 in	196.9 mm
L	4-17/32 in	115.0 mm
A	1-9/16 in	49.21 mm
J	6-3/16 in	157.2 mm
N	3/4 in	19.05 mm
A1	19/32 in	15.08 mm
A2	55/64 in	21.79 mm
A0	2-5/32 in	54.74 mm
B	2-1/32 in	51.58 mm
S	3/4 in	19.05 mm

💡

💡 What is a pillow block bearing used for?

This handy piece keeps shafts aligned and supported in a compact, mountable package.

- typical applications include conveyors, packaging lines, and automation rigs - supports rotating shafts with sealed ball bearing options for smooth operation - ceramic variants offer low friction in high-speed or clean-room setups - ideal for mounting on flat surfaces in linear slide unit assemblies