Toyota 4Runner Panhard Correction Kit PCK For 3rd Gen 1996 To 2002 Bolt On Frame Mount Alignment Drop Bracket With Two Hardened 3mm Spacers Easy Slide On Install For Better Steering And Precise Wheel Alignment
✔️ Bolt-on frame mount alignment drop bracket with two 3mm spacers
This Panhard correction kit is designed for 3rd Gen 4Runner models from 1996 through 2002. It slides over the frame mount and uses the factory pivot bolt hole for precise placement, simplifying alignment work after a lift. Pack includes a single kit with built-in spacers for proper fitment.
✅ Restores Panhard bar to original horizontal position for axle centering (50.8 mm / 2 in)
✅ Includes two hardened spacers (3 mm / 0.118 in) to retain factory mount inner diameter
✅ Lifts the axle-end by 2 inches (50.8 mm) without frame interference under full flex with stock bump stops
✅ Supports lifts up to about 4 inches with improved roll center; 4-4.5 inch lift keeps roll center near factory
💡 What is a Panhard correction kit for a 3rd Gen Toyota 4Runner and how does it help wheel alignment?
This handy guide explains how this bolt-on part keeps suspension geometry solid. - Restores Panhard alignment to reduce axle offset after lift - Simplifies installation with a frame mount drop bracket and factory bolt holes - Helps maintain steering feel and wheel alignment through adjusted roll center ✝️