Three-Stage Air System With Zinc Alloy Body, Built Tough, Particulate Filter, Coalescing Filter, Desiccant Dryer, And Regulator, Poly Bowl, Manual Drain, Mid-Flow, Ideal For Paint Spray And Plasma Cutter, 1/2 NPT

Three-Stage Zinc Alloy Air System for Paint & Plasma Cutting
✔️ 1/2 in NPT, 145 psi max, 105 SCFM @ 90 psi, poly bowl

This compact three‑stage air filtration unit combines a zinc alloy body with a water trap filter, a coalescing filter, and a desiccant dryer to deliver clean, dry air for spray painting and plasma cutting.

✅ Stage 1: Filter & Regulator with 5 micron element removes moisture and particles; regulator stabilizes pressure.
✅ Stage 2: Coalescing Filter with 0.01 micron element removes 99.9% moisture, oil, and smaller particles; red indicator signals replacement.
✅ Stage 3: Desiccant Dryer uses beads that change blue to pink when replacement is needed.
✅ Zinc alloy body offers high hardness and durability, supporting up to 145 psi max.
✅ Accessories include two 5 micron elements, two 0.01 micron elements, two desiccant bead bags, 1/2 in NPT fittings, brass air coupler kit, and thread seal tape.

💡 What is a zinc alloy three-stage air filtration system with desiccant dryer used for in workshop settings? Here's a handy answer.

- This handy setup delivers clean, dry air to protect spray equipment and plasma cutters.
- It removes moisture, oil, and particulates in sequential stages for reliable tool performance.
- It maintains steady pressure and flow up to 145 psi and 105 SCFM.
- It is easy to service with replaceable elements and color-changing desiccant beads.