Three Quarter Inch By Six And One Quarter Inch Hex Sleeve Anchor Zinc Plated Pre Assembled All Steel Heavy Duty Ideal For Masonry Concrete Brick Or Block Five Per Box 360 Degree Expansion For Consistent Hold Across Masonry Solid Concrete

3/4 x 6-1/4 in Hex Sleeve Anchor, Zinc Plated (5pc)
✔️ 3/4 in hole, 6-1/4 in length, zinc plated, 5-pack box

This heavy-duty sleeve anchor is designed for masonry applications, delivering a strong grip in concrete, brick, and block. It ships pre-assembled with all-steel parts and a zinc plating for durability in dry environments. Ideal for mounting fixtures, brackets, and electrical fittings where a secure, permanent hold is required.

✅ Hole diameter and hole preparation: 3/4 in (19 mm) hole in base material, drill with carbide-tipped bit per ANSI standards in a hammer drill
✅ Overall size: 6-1/4 in (158 mm) long, 3/4 in (19 mm) diameter
✅ Minimum embedment: 2-1/4 in (57 mm) into concrete
✅ Maximum fixture thickness: 4 in (102 mm)
✅ Fixture hole size: 7/8 in (22 mm) in the fastened piece
✅ Center-to-center spacing: 7-1/2 in (190.5 mm) between anchors
✅ Edge distance: at least 3-3/4 in (95 mm) from any unsupported edge
✅ Material: carbon steel, zinc plated; designed for a dry environment
✅ Pack size: 5 anchors per box; pre-assembled for quick installation

💡 What is a sleeve anchor used for in masonry installations? Sleeve anchors are handy for securing heavy fixtures to concrete, brick, and block, delivering strong pullout resistance.

- Handy for mounting electrical boxes and fixtures on concrete surfaces - Great for securing straps, brackets, and supports to masonry - Works well in dry masonry environments with standard 3/4 in anchors