Straight Up Stunning Vintage Pendant Light With Blue Rectangular Hammered Glass And Brushed Brass Hanging Fixture Featuring A Super Long Cord That Hits Different In Farmhouse Kitchens And Dining Rooms
✔️ E26 Socket, 200cm Cord, Brushed Brass Finish, 60W Max, Hardwired
This single pack fixture brings textured blue glass and refined brass together in a clean overhead design. You hang it easily over extended countertops, banquets, or foyer consoles to wash the area in steady, water ripple glow without cluttering sightlines.
✅ Blue rectangular hammered glass shade measuring 18cm (7.09in) x 8cm (3.15in) x 10.2cm (4.02in)
✅ Brushed brass canopy base spanning 12cm (4.72in) across the mounting plate
✅ Adjustable suspension cord reaches 200cm (78.7in) total length for vaulted or steep angles
✅ Matches standard e26 threads and handles up to sixty watts across all common lamp families
💡 What is the correct wiring sequence when swapping a heavy ceiling fixture in high humidity zones? - Kick the main breaker off, drop the old mount down, and sweep the attic space with a voltage tester probe. - Peel back the romex sheath about an inch, strip the insulation, twist all bare copper grounds together, and clamp tight wire nuts onto the black and white leads. - Bolt the iron ceiling plate flush against the framing, feed the braided cord through the top loop, and finger tighten the collar so the glass sits square. - Screw in a handy sixty watt led swap, flip the wall switch back on, and spin the rotary dial gradually till you get steady flicker free light.
✝️