Spur Gear With 14.5 Degree Pressure Angle, 16 Pitch, Half Inch Bore, Two and a Half Inch Outer Diameter, Half Inch Face Width, 38 Teeth, High Carbon Steel For Quiet, Smooth Torque Across Parallel Shafts

14.5° PA spur gear, 16 DP, 1/2 in bore, 2.5 in OD
✔️ 38 teeth, high-carbon steel, 14.5° PA, 16 DP, 1/2 in bore

This spur gear transmits torque between parallel shafts in mechanical systems, delivering rotational power to conveyors, manufacturing equipment, and other industrial machinery. It uses a 14.5-degree pressure angle with a 16 diametral pitch to balance torque transfer and precise speed control, and is made from high-carbon steel for durability.

✅ Diametral pitch (DP): 16 for accurate torque transfer and speed control
✅ Pressure angle: 14.5 degrees for higher contact ratio and quieter operation
✅ Material: high-carbon steel for tensile strength and hardness
✅ Teeth count: 38; outer diameter ~2.5 inches; bore 0.5 inches

💡 What is a spur gear used for in mechanical power transmission? This handy gear is used to transfer rotary motion between parallel shafts in many machines. - In machine drives like conveyors and packaging lines - With 14.5° PA and 16 DP for reliable torque transfer and controlled speed - Made from high-carbon steel for durability in industrial settings

✝️