Single Unit Set Screw Pillow Block Bearing 2 in (50.8 mm) ID, 440C Stainless Steel Insert, White PBT Polymer Housing, Wide Inner Ring, 5/8 in Mounting Bolts, 1/4-28 UNF Grease Fitting, Sealed Washdown Unit

Single 2 in Set Screw Pillow Block Bearing, White Housing
✔️ 2 in (50.8 mm) ID, 440C stainless insert, 5/8 in bolts, 1/4-28 UNF

This is a single pillow block bearing unit with a sealed stainless steel insert and white PBT polymer housing. It’s designed for washdown and industrial shaft support in conveyors, food machinery, packaging lines, and other shafted equipment.

✅ Shaft diameter: 2 in (50.8 mm)
✅ Insert: MUC210-32 440C stainless ball bearing, wide inner ring
✅ Housing: PPL210 white PBT thermoplastic pillow block
✅ Locking: Set screw locking inner ring for secure shaft hold
✅ Bolt size: 5/8 in (15.88 mm) mounting bolt requirement
✅ Grease fitting: 1/4-28 UNF lubrication tap, relubrication capable
✅ Seal: Contact seal with slinger for washdown protection
✅ Temp rating: up to 212 F (100 C); weight 2.80 lb (1.27 kg)

💡 What is a pillow block bearing used for in sealed washdown equipment? Pillow block bearings support rotating shafts while protecting sealed ball bearings from contaminants in wet or caustic environments. - Supports shafts in conveyors, pumps, mixers, and food processing equipment where sealed ball bearing protection is needed. - Allows relubrication via standard 1/4-28 UNF fittings while keeping out water, dust, and debris. - Stainless steel inserts and PBT housings offer corrosion resistance for washdown and hygienic settings; good for sealed ball bearing or linear slide unit retrofits.