Single Heavy-Duty Pillow Block Bearing UCP314-43 - 2-11/16 in I.D., Cast Iron P314 Housing, Set-Screw Locked Ball Insert, Sealed Contact Seal with Slinger, Wide Inner Ring, 7/8 in Bolt, 1/8-27 NPT Port

Heavy-duty 2-11/16 in pillow block bearing
✔️ Single unit, cast iron housing, set-screw lock, sealed insert

This single heavy-duty pillow block bearing (UCP314-43) is a sealed ball insert in a cast iron P314 housing, ideal for supporting rotating shafts on conveyors, motors, fans and agricultural or industrial equipment.

✅ Model: UCP314-43, single pillow block unit
✅ I.D.: 2-11/16 in; inner ring width: wide; bolt size: 7/8 in
✅ Insert type: sealed ball bearing; material: bearing steel; locking: set screw
✅ Housing: cast iron P314; covers: no; duty: heavy; expansion: no
✅ Lubrication: 1/8-27 NPT fitting tap; relubrication allowed; max temp 212°F
✅ Seal: contact seal with slinger; pillow block application for industrial shafts

💡 What is a sealed pillow block ball bearing used for in industrial shaft support?
A sealed pillow block bearing is handy for giving reliable shaft support where contamination control and easy maintenance matter. - Supports rotating shafts on conveyors, motors, gearboxes, fans and agricultural equipment for steady radial load handling. - Sealed ball bearing insert reduces dirt and moisture ingress while allowing relubrication via a 1/8-27 NPT port. - Set-screw locking and wide inner ring improve axial holding and accommodate moderate misalignment. - Cast iron P314 housing provides rigid mounting and long life in heavy-duty industrial settings.