Run Your Rig Like New Again With This Top Shelf Eight Piece Card Printer Cleaning Kit Including Pre Saturated Long And Short Cards For Flawless Printhead And Roller Tuneups Compatible With Zebra Models

Heavy duty eight piece card printer cleaner kit
✔️ Four long and four short pre soaked maintenance cards

This eight piece maintenance pack keeps card printers running smooth inside print shops and office ID stations. Each individually wrapped wipe arrives pre loaded with solvent solution so you can blast dust and dried ink off the platen and feed rollers without cracking the casing open.

✅ Four long cleaning wipes measuring 330mm for full roller runs
✅ Four shorter maintenance strips at 156mm for tight head slots
✅ Fits P110i P120i and P110m chassis models perfectly
✅ Clears streaks and sticky buildup from thermal transfer heads
✅ Stops paper binds and cuts down on costly hardware repairs
✅ Works right out of the wrapper with zero tool assembly needed

💡 What routines do print crews usually follow to keep thermal heads from cooking under load?

Slipping solvent cards through the path on a fixed calendar stops heat sinks from trapping gunk and keeps ribbon tracking straight during busy rushes. This handy approach saves you from ripping the guts open or sending units back to support.
- Cycle maintenance strips every twenty five thousand passes to sweep wax and dust off the heating pins
- Set the motor speed low so the scrubbing action drags evenly across the roller path without skipping spots
- Replace the wiped out pads when ghosted lines start showing up on otherwise clean plastic cards
- Pull fresh packs from the box only when you are ready since the seal locks in the solvent strength