Rock Solid High Misalignment Spacers Converting Three Quarter To One Half Inch Rod Ends And Heim Joints Heavy Duty Steering Linkage Bushings With Slick Fit Four Pack
✔️ Four pack hardened bushings converts three quarter bores to half inch bolts
This four pack of high misalignment spacers acts as a reduction sleeve for automotive and off road builds. You mount them directly inside large bore heim joints or spherical rod ends to create a secure pivot point for smaller diameter hardware. Mechanics usually install them when upgrading steering linkages, tie rods, or suspension control arms that come with oversized mounting holes. The design allows smooth multi plane movement without binding or creating excess friction during tough turns or bumpy terrain driving.
✅ Outer diameter measures 3 4 inch to fit standard heim joint housings cleanly
✅ Inner bore accepts 1 2 inch bolts for direct hardware connection without play
✅ Hard chrome plating delivers surface hardness that handles constant pivoting loads
✅ Compact spacer geometry maximizes steering pivot radius while absorbing vibration
💡 Why do grease monkeys prefer steel spacer sleeves over direct mounted rod ends for heavy duty steering rigs?
Dropping a handy reducer bushing in takes the heat off pricey spherical joints by spreading torque evenly across the stud while keeping your setup rock solid.
- Chrome coating halts fretting corrosion from developing between mating surfaces during repeated pivot cycles
- Strict dimensional limits wipe out slop that causes vagueness in steering response on loose gravel roads
- Ample misalignment capability lets cross shafts swing wide without clamping up adjacent frame brackets