PTFE Lined Steel Flanged Bearing Three Quarters Inch Bore Seven Eighths Inch OD Three Quarters Inch Length Sixteen Thousandths Of An Inch Flange Thickness One And One Eighth Inch Flange Diameter Heavy Duty Plain Bearing With Low Friction Motion

PTFE-Lined Steel Flanged Bearing: 3/4 in bore, 7/8 in OD
✔️ ID 3/4 in, OD 7/8 in, length 3/4 in, flange 1-1/8 in dia (Single)

This PTFE-lined steel flanged bearing is a ready-to-install plain bearing used in motors, industrial machines, automotive applications and power tools to reduce friction while supporting loads perpendicular and parallel to the shaft.

✅ ID 3/4 in (19.05 mm); OD 7/8 in (22.23 mm); L 3/4 in (19.05 mm)
✅ Flange thickness 1/16 in (1.59 mm); Flange diameter 1-1/8 in (28.58 mm)
✅ Liner: PTFE; Backing: steel
✅ Dynamic load capacity: 140 N/mm2; Static load capacity: 250 N/mm2
✅ Max dry sliding speed: 2.5 m/s; Coefficient of friction: 0.02-0.20
✅ Temperature range: -320 to 530°F; Suitable for chemical/high-temp environments
✅ Typical uses: industrial machines, motorcycles, automobiles, power tools, mechanical equipment

💡 What is a PTFE-lined steel flanged bearing used for in machinery?

PTFE-lined steel flanged bearings reduce friction and wear in rotating shafts and support mixed loads, making them handy in tough, maintenance-heavy environments. - High-load support along and perpendicular to shafts - Low friction across wide temperature ranges - Chemical resistance helps in harsh tool environments - No lubrication needed in many dry-running setups ✝️