Professional 1/2 Inch Drive Pneumatic Air Impact Wrench Delivering 1100 Ft Lb Of Hard Hitting Torque At 7000 Rpm Free Speed, Grease Monkey Approved Shop Workhorse

Industrial Air Impact Wrench Handles Heavy Mechanical Jobs Daily
✔️ 1100 ft lb torque runs at 7000 rpm weighs 2.5 kg spans 171 mm

This 1/2 inch drive pneumatic impact wrench delivers serious stopping power for heavy mechanical tasks. Auto technicians rely on this unit to smash loose frozen fasteners and crank down tire hardware on semi rigs without straining their joints.

✅ Heavy duty 12 inch square drive mounts standard 17.5 mm plus 0.69 inch socket adapters
✅ Spins at 7000 rpm free speed to clear stubborn threads in half the time
✅ Handles 27 mm plus 1.06 inch head sizes while pushing 1100 foot pounds of max torque
✅ Draws 0.23 m3 min airflow that converts to eight cubic feet per minute demand
✅ Compact frame clocks in at 2.5 kg plus 5.5 lbs weighing in at 171 mm plus 6.7 inches long
✅ Registers a manageable 87 dBA noise level to keep job site audio complaints low
✅ Connects to 10 mm plus 0.4 inch hoses via a standard 1/4 inch threaded air inlet

💡 How much CFM rating does a standard compressor need to drive a professional grade pneumatic impact wrench effectively?
A handy tip for garage owners involves matching your shop air capacity to the continuous cycle demands of your toughest builds. Keep your machine spinning strong with these maintenance routines.
- Install a quality drip leg trap to catch water vapor before it fouls the internal valve housing
- Schedule monthly lubricator refills to coat the reciprocating piston plates and reduce friction heat
- Swap cracked rubber seals immediately once you notice pressure drops below the operating range
- Verify your tank regulator sits at ninety psi minimum to hit the full 1100 foot pound rating