Precision 4 Jaw Self Centering Scroll Chuck For 100Mm Mini Metal Lathes Delivering Rock Solid Stability And Dead Nuts Accuracy Ideal For 7X14 Bench Machines And Weekend Fabricators Wanting Flawless Turns Every Single Time

Sturdy 4 jaw scroll chuck for 7x14 mini metal lathes today
✔️ Cast iron mount fitted with steel jaws holds round stock tight

this precision four jaw scroll chuck swaps straight into 7x14 bench machines to shake off tired faceplates. weekend fabricators mount it direct to standard spindles to roll cylinders, taper rods, and drive shafts without any wobble. the rig runs a 1 inch / 25 mm mounting thread, 22 mm / 0.866 inch through hole, and an 84 mm / 3.31 inch bolt pattern that lines up clean to mini lathe flanges.

✅ Mount measures 1 inch / 25 mm with a 22 mm / 0.866 inch center opening
✅ Bolt circle spans 3.31 / 84 mm across with a front edge reaching 2.83 / 72 mm
✅ Internal clamping covers 2 / 0.08 inch to 30 / 1.18 inch and external spans 30 / 1.18 to 80 / 3.15 inch
✅ Rated for continuous spin up to 3500 rpm under full shop loads

💡 how does a four jaw scroll chuck improve repeatable turning accuracy on small bench lathes?
A proper scroll mechanism spreads rotational force evenly across all four contact points instead of relying on uneven pressure tips. This prevents warping during heavy cuts. Look for these core benefits when upgrading your machine.
- Independent jaw tracking locks irregular blanks flat against the hardened faceplate while absorbing heavy lateral thrust
- Tighter runout tolerances keep tool edges engaged evenly which extends carbide insert life and reduces finish sanding needs
- Direct spindle coupling eliminates belt slip during aggressive roughing passes so operators recover exact feed rates instantly

✝️