Portable Pro Grade Handheld Vibration Calibrator For Accelerometers And Vibration Monitoring Systems, 159.2 Hz RMS Vibration Check, Verifies Recording Gear, VMC606 Model, Supports Up To 150 G

Handheld Calibrator Verifies Vibration Sensors and Monitoring Gear
✔️ 159.2 Hz freq, 10 m/s2 accel, 10 mm/s vel, 150 g max load

This handheld shaker gives a controlled rms vibration for checking accelerometers and vibration monitoring systems right in the field or shop.

✅ Operating frequency 159.2 Hz plus or minus 0.5 percent
✅ Acceleration output 10 m/s squared rms plus or minus 3 percent
✅ Velocity output 10 mm per second rms plus or minus 3 percent
✅ Displacement output 10 um rms plus or minus 3 percent
✅ Maximum load 150 g with ramp up under 3 seconds
✅ Runs on 4 aa batteries size 56 mm by 200 mm

💡 What is a vibration calibrator used for in industrial setups? A vibration calibrator supplies a known steady signal so you can confirm sensors stay accurate before critical checks. - Verifies accelerometers and recording gear at a fixed 159.2 hz rate - Handles loads up to 150 g with outputs for acceleration velocity and displacement - Works handy for quick field tests on vibration monitoring systems - Keeps readings reliable with low distortion under 3 percent

✝️