Polyimide Tape Alternative For High Temp Electronics, 2 Inch Wide By 36 Yard, 24 Roll Case, Electrical Grade Film Coated For UL510 And MIL P 46112B, Adhesion About Twenty Three Point Eight Ounces Per Inch, Dielectric Strength Over Four Thousand Volts
✔️ 2 in (50.8 mm) wide, 36 yd (32.9 m) long; 24-roll case
This polyimide tape is a Kapton substitute designed for high-temperature electronics assembly. It arrives as a 2" wide, 36-yard length in a 24-roll case, making it ideal for masking, insulation, and protecting gold contacts during soldering and board processing. The electrical-grade film with a silicone adhesive delivers strong adhesion, clean removal, and reliable dielectric performance in demanding manufacturing environments.
UL510 and MIL-P-46112B compliant polyimide film coated with a high-performance silicone adhesive; thin, conformable, and featuring excellent tear and abrasion resistance at elevated temperatures; leaves minimal residue when removed after processing, helping reduce cleanup and rejects. Color: Gold
✅ UL510 and MIL-P-46112B compliant polyimide film with a high-performance silicone adhesive
✅ 1 mil film thickness; 2.6 mil total tape thickness for good conformability
✅ Adhesion 23.8 oz/in; Dielectric strength > 4000 V
✅ Leaves minimal residue after removal; reduces cleanup and rejects
✅ Excellent chemical resistance to acids, oils, solvents and water immersion
✅ Gold color aids visibility during masking and inspection
💡 What is a handy use case for polyimide tape in electronics manufacturing?
Handy for masking, insulation, and protecting sensitive circuitry during high-temp processing.
- Masking during soldering and wave soldering with heat resistance
- Protects gold contacts and critical traces from molten solder
- Ensures board visibility during assembly and curing
- Low residue removal helps reduce post-process clean-up