No Nonsense Heavy Duty Magnetic Drill Press With 2700 Lbs Max Clamping Power And Premium Two Inch Hss Annular Cutter Kit Made For Real Shop Work And Steady Daily Grind Sessions

Magnetic drill press with heavy grip and hss cutter set
✔️ 2700 lb magnetic force output combined with 1200W motor housing

This single complete package bundles the heavy magnet unit alongside an eleven piece cutter rack. It delivers a practical magnetic drilling machine designed for industrial shops where secure positioning matters most. The device locks firmly to flat steel plates so operators can bore accurate pilot holes or run larger diameter openings without manual handling risks.

✅ 45 mm 1-3/4 inch maximum boring diameter rating
✅ 180 mm 7 inch maximum boring depth specification
✅ 11 piece high speed steel annular cutter set 7/16 to 1-1/16 inch sizes
✅ 1200 watt motor assembly powering 0 to 500 RPM rotation speed
✅ MT2 taper spindle shaft accepting both metric and inch weldon bits
✅ Fourteen kilogram two thousand seven hundred pound magnetic pull strength

💡 What setup procedures help operators get clean cuts when using a magnetic drill on hard steel plate?
Keep things handy and straightforward by wiping the contact zone clean before you ever flip the main power switch.
- Apply direct petroleum cutting fluid straight onto the rotating edge to control heat buildup during deep penetration cuts
- Drop the transmission into low gear immediately after locating the center punch mark to avoid wandering bits
- Maintain constant downward pressure while riding the mechanical feed lever until the pilot spur finishes its job

✝️