MUCTPL205-14W 7/8 in (22.23 mm) Stainless Steel Insert Set-Screw Take-Up Housing White Polymer TPL205 Washdown Bearing with Contact Seal, Relubrication & 1/4-28 UNF Fitting

MUCTPL205-14W 7/8 in Stainless Insert Take-Up Housing
✔️ 7/8 in (22.23 mm) I.D., stainless insert, set screw, single unit

This single take-up housing holds a stainless steel sealed ball bearing insert for washdown conveyor and linear slide unit duty in food and light industrial settings.

✅ I.D.: 7/8 in (22.23 mm)
✅ Insert: Stainless steel ball bearing
✅ Locking: Set screw
✅ Inner ring width: Wide
✅ Seal: Contact seal with slinger
✅ Lubrication: 1/4-28 UNF grease fitting, relubrication allowed
✅ Housing: White polymer TPL205, washdown rated
✅ Temp rating: up to 212 F (100 C)
✅ Covers: No-duty standard

💡 What is a take-up housing used for in washdown conveyor systems? It supports a sealed ball bearing insert to tension and locate shafts while resisting corrosion in wet environments. - Supports and locates shafts in conveyors and linear slide units, with easy set-screw locking - Protects a sealed ball bearing insert with contact seals and a slinger for washdown protection - Allows relubrication via a 1/4-28 UNF fitting while using stainless inserts for corrosion resistance