MT5 F118 Morse Taper Dead Center With Tungsten Carbide Tip And 60 Degree Point Angle For Wood And Metal Machining Built Tough As Nails For Knockout Precision And Zero Chatter During Heavy Turning

High Precision MT5 Lathe Dead Center With Carbide Point
✔️ 40Cr steel core, 60 deg cone, 180mm length, 1.64kg load rating.

This single unit is a precision ground morse taper dead center designed to support workpieces securely during heavy lathe operation. Shop owners use it for steady woodturning and precise metal cutting jobs that demand zero chatter and stable backing support.

✅ Precision ground 40cr alloy steel for tight tolerance holding
✅ Tungsten carbide tip delivers sharp 60 degree cutting contact
✅ Heat treated shaft resists deformation under heavy cutting loads
✅ Solid 180mm reach suits deep chuck setups on industrial mills

💡 What causes chatter when mounting a dead center on a lathe spindle?
Finding a handy fix for tool shake is easier than you think. Most operators see wobble because of mismatched taper sizes or accumulated mill scale blocking the seat.
- Verify the mt5 taper fits snugly into your tailstock boring bar holes
- Wipe away old grease with brass wire mesh to unlock full friction grip
- Torque the drive stud evenly so rotational force transfers without slip
- Swap to fresh carbide tips promptly when machining hardened steel rods

✝️