Kick Ass 2 Inch TCT Tungsten Carbide Annular Cutter For Magnetic Drill Press Mag Drill Bit 3 4 Inch Weldon Shank Metal Hole Saw For Steel Stainless Steel Cast Iron 2 Inch Depth Pro Shop Grade

2 Inch Tungsten Carbide Annular Cutter Single Mag Drill Bit
✔️ 2 Inch OD x 2 Depth 3/4 Weldon Shank with 5/16 Pilot Pin

This single metal hole saw delivers straight, burr-free cuts in heavy plate stock without bending the shank during tough mag drill jobs. Shop crews and field techs grab this tungsten carbide annular cutter to bore through stainless steel flanges, cast iron valve bodies, and thick structural beams while keeping feed pressure steady.

✅ Tungsten alloy cutting edge holds its temper during continuous steel drilling operations
✅ Inner middle and outer cutting zones balance radial force for steady chip clearance
✅ Double sided cross cut tool holder grabs tightly into magnetic base chucks
✅ Upgraded groove channels sweep hot swarf away fast to keep bore temps down

💡 What matters most when running a high RPM annular cutter head on thick steel plates? You need a rig that stays handy under load and carries chips out so heat never stalls your progress.
- Tungsten carbide annular cutter blades beat standard high speed steel bits so the machine shop budget stretches further
- Magnetic drill press mounts lock solid because the cross cut holder clamps down without slipping
- Chip clearing tunnels make deep hole saw runs handy by flushing cut shavings out before friction spikes
- Firm hand pressure on the 5/16 pilot pin keeps holes perfectly round and stops the bit from walking off mark

✝️