Jacobs Drill Chuck For Tailstock 1/4 Inch, 3-Jaw Precision Lathe Chuck With Key, Centering Drill Ream And Tap Capabilities, Accepts Bits From Three Thirty Second To One Quarter Inch, Rugged Lathe Accessory For Spot On Centering
UPC:
✔️ 3-jaw tailstock drill chuck for 3/32-1/4 in bits; Morse arbors
Compact, precision-tailstock accessory designed for hobby and small machining setups. It enables centerline drilling, reaming, and tapping on parts mounted in the headstock or tailstock for accurate hole placement.
| Drill range | 3/32 in (2.4 mm) to 1/4 in (6.4 mm) |
| Arbors | #0 Morse, #1 Morse |
✅ 3-jaw precision chuck with key for centered drilling
✅ Accepts drills from 3/32 in to 1/4 in (2.4-6.4 mm)
✅ Includes #0 Morse arbor and #1 Morse arbor for tailstock and mill use
✅ For ultra-tight runout, use collets instead of the chuck
💡 What is a tailstock drill chuck used for in a small lathe setup to center-line drill, ream, and tap parts?
This handy tool helps keep drill bits aligned for center drilling, reaming, and tapping.
- Centering holes accurately along the workpiece axis.
- Works with tailstock ram feed for controlled drill advancement.
- Includes Morse arbors to fit tailstock or mill headstock.
- For ultra-tight runout, use precision collets instead of the chuck.