Heavy Duty Zinc Alloy Flip Top Hinges For Folding Tables, Rock Solid Smooth Action Hardware, Silver Finish, 3.1 X 1.18 Inch No Sweat Assembly Kit With Rust Proof Screws And Pro Grade Quality

Heavy duty zinc flip hinges for folding tables
✔️ Four zinc flip mounts at 79 by 30 mm or 3.1 by 1.18 inches with fasteners

These robust flip top hinges give your workbench or portable display frame a stable pivot point that survives daily setup changes. Made from solid zinc alloy with a polished silver coating, they stand up to shop moisture and keep moving free without squeaking. Handy for craft booths, sewing stations, and drafting boards, each order delivers four mounts plus twenty four matching fasteners so you skip extra trips to the hardware aisle.

✅ Zinc alloy shell blocks corrosion and takes repeated drops without warping
✅ Latches measure seventy nine by thirty mm or 3.1 by 1.18 inches thick to two mm depth
✅ Swings flat from zero to 180 degrees for secure edge clamping
✅ Carries fifty five pounds across the panel width without sagging
✅ Ships with twenty four M4 pan head screws rated for 3 mm thread depth

💡 Which mounting method prevents fiberboard edges from cracking when installing fold flat hinges? Starting with a pilot hole sized half a millimeter lighter than your driver tip keeps the grain intact while the metal bite locks tight. - Mark the centerline first so the bracket sits perfectly aligned for even stress distribution during wide swings. - Snug the fasteners crosswise to flatten the baseplate before giving the final quarter turn. - Rub a dab of dry graphite near the knuckle pins to cut friction on heavy lids.

✝️