Heavy Duty Two Ton Electric Linear Actuator With 200mm Stroke And 12V DC Power For Tipping Trailers Scissor Lifts Boasting 800W Copper Motor And Weather Sealed Housing This Rock Hard Workhorse Built Tough For Daily Grind

Reliable 12V DC Linear Actuator for Utility Trailer Lifts
✔️ 2T load capacity, 200mm travel, quick cycle, IP54 seal

This electro hydraulic linear drive converts standard battery voltage into smooth extending and retracting motion using an internal gear pump and integrated valve block. Mechanics typically mount these units on utility trailers, scissor lifts, and industrial dump beds where steady push force moves heavy cargo across rough job sites. The handy wireless regulator lets operators dial in exact ramp angles without stepping away.

✅ 800 watt copper motor pushes the ram at 24.9 mm/s (0.98 in/s) during steady lifting phases
✅ 200 mm (7.87 inches) travel depth handles standard bed rise needs without extra frame mounting
✅ IP54 weather shield keeps mud, snow, and salt spray out of sensitive electrical housings
✅ Automatic overload cutoff protects drivetrain gears from snapping when weight exceeds limits
✅ Closed loop pressure locks keep the platform flat and secure even after engine shutdown

💡 How does an electro hydraulic sliding jack maintain grip without external brake hardware?
- The sealed fluid corridor traps pressurized oil inside the barrel to fight gravity dropping the shaft
- Smart directional spools divert excess flow back to the reservoir when load weight hits peak ratings
- Handheld throttle knobs give precise travel modulation for delicate material placement tasks
- Heavy chrome guide pins track perfectly inside bronze bushings to stop lateral wobble during heavy shifts